WORKSITE PT 26mm Rotary Hammer – 800W

KSh 9,500.00

800W Motor Performance: Provides 3.0 Joules of impact energy, making it an ideal balance between low tool weight and high concrete penetration speed.
Compact SDS-Plus Chuck: Enables fast, tool-free bit changes while ensuring positive torque transfer during hammer drilling.
3-Mode Operation Dial:
1. Rotary Only: For standard drilling in timber, plastic, and metal sheet using an SDS adapter chuck.
2. Hammer Drilling: Combines rotation with high-frequency hammering to drill into brick, stone, and reinforced concrete.
3. Chiseling (Rotation Stop): Locks rotation for light chasing, channel cutting, mortar removal, and tile stripping.
Variable Speed & Reversing Switch: Trigger-controlled variable speed allows smooth hole starts, with forward/reverse rotation for removing bound drill bits.
360-Degree Adjustable Auxiliary Handle: Rotatable front handle with an integrated adjustable depth gauge rod for consistent blind hole depth.

Add to wishlist

Category: Electrical power tools Tags: ERH106, Rotary hammer

Description
Reviews (0)

Description

Worksite PT 26mm Rotary Hammer – 800W (RH109-800 / RH26 series) is a lightweight yet powerful SDS-Plus combination rotary hammer drill designed for concrete drilling, masonry anchor installation, light chiseling, and wood/metal drilling.

Technical Specifications

Parameter	Specification
Model	RH109-800 / RH26 / PT 800W
Input Power	800 W
Voltage / Frequency	220–240 V ~ 50/60 Hz
Impact Energy	2.8 J to 3.0 J
Impact Rate	0 – 4,000 BPM (Blows Per Minute)
No-Load Speed	0 – 1,100 RPM
Max Drilling Capacity (Concrete)	26 mm
Max Drilling Capacity (Steel)	13 mm
Max Drilling Capacity (Wood)	30 mm
Tool Holder / Chuck System	SDS-Plus (Quick-change SDS drive)
Operating Modes	3 Modes (Drilling, Hammer Drilling, Chiseling)
Weight	~2.8 kg to 3.2 kg

Key Features & Design Highlights

800W Motor Performance: Provides 3.0 Joules of impact energy, making it an ideal balance between low tool weight and high concrete penetration speed.
Compact SDS-Plus Chuck: Enables fast, tool-free bit changes while ensuring positive torque transfer during hammer drilling.
3-Mode Operation Dial:
1. Rotary Only: For standard drilling in timber, plastic, and metal sheet using an SDS adapter chuck.
2. Hammer Drilling: Combines rotation with high-frequency hammering to drill into brick, stone, and reinforced concrete.
3. Chiseling (Rotation Stop): Locks rotation for light chasing, channel cutting, mortar removal, and tile stripping.
Variable Speed & Reversing Switch: Trigger-controlled variable speed allows smooth hole starts, with forward/reverse rotation for removing bound drill bits.
360-Degree Adjustable Auxiliary Handle: Rotatable front handle with an integrated adjustable depth gauge rod for consistent blind hole depth.
Safety Overload Clutch: Built-in mechanical slip clutch automatically disengages the drive gears if the bit binds in rebar or hard stone, protecting the operator from wrist kickback.